您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE AMS3894/14 Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated, G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 1

作者:标准资料网 时间:2024-04-30 15:32:17  浏览:8498   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS3894/14
Title:Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated, G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 175 (347)
Issuing Committee:Ams P17 Composite Materials Committee
Scope:This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet. Primarily for use in structural composites requiring very high modulus of elasticity in tension and high tensile strength up to 175 degrees C (347 degrees F).
下载地址: 点击此处下载
基本信息
标准名称:平面磁控溅射靶材 光学薄膜用硅靶
英文名称:Flat magneting sputtering target—Silicon target for optical coating
中标分类: 冶金 >> 有色金属及其合金产品 >> 稀有高熔点金属及其化合物
ICS分类: 冶金 >> 有色金属产品 >> 其他有色金属产品
发布部门:中华人民共和国工业和信息化部
发布日期:2009-12-04
实施日期:2010-06-01
首发日期:
作废日期:
主管部门:全国有色金属标准化技术委员会
提出单位:全国有色金属标准化技术委员会
归口单位:全国有色金属标准化技术委员会
起草单位:利达光电股份有限公司
起草人:李智超、杨太礼、付勇、段玉玲、张向东、赵伦
出版社:中国标准出版社
出版日期:2010-06-01
页数:8页
适用范围

本标准规定了平面磁控溅射光学薄膜用硅靶材的要求、试验方法、检验规则、标志、包装、运输、贮存及订货单(或合同)内容。
本标准适用于平面磁控溅射光学薄膜用硅靶材。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T1551 硅、锗单晶电阻率测定 直流两探针法
GB/T2040 铜及铜合金板材
GB/T5121(所有部分) 铜及铜合金化学分析方法
GB/T5231 加工铜及铜合金化学成分和产品形状
GB/T12963 硅多晶

所属分类: 冶金 有色金属及其合金产品 稀有高熔点金属及其化合物 冶金 有色金属产品 其他有色金属产品
Product Code:SAE AMS3901/8
Title:Yarn, Organic Fiber (Para-Aramid), High Modulus, 195 Denier, (215 d tex), 1.2% Finish
Issuing Committee:Ams P Polymeric Materials Committee
Scope:This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.Organic 195 denier (215 d tex) yarn with 390 ksi (2689 MPa) or 21.0 g/d minimum tensile strength and 18 Msi (124 GPa) or 895 g/d minimum tensile modulus for use in weaving requiring high tensile strength and high modulus of elasticity in tension.