SAE AMS4191 Aluminum Alloy, Welding Wire, 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)
作者:标准资料网 时间:2024-05-19 22:46:53 浏览:8562
来源:标准资料网
Product Code:SAE AMS4191
Title:Aluminum Alloy, Welding Wire, 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of welding wire.This wire has been used typically as filler metal for gas-metal-arc or gas-tungsten-arc welding of aluminum alloys of similar composition where the joint is capable of being heat treated to a strength level comparable to that of the parent metal, but usage is not limited to such applications.
【英文标准名称】:TestMethodforSulfurinPetroleumProducts(GeneralBombMethod)(05.01)
【原文标准名称】:石油产品含硫量试验方法(普通氧弹法)(05.01)
【标准号】:ANSI/ASTMD129-2000
【标准状态】:作废
【国别】:美国
【发布日期】:2000
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:试验;石油产品
【英文主题词】:Bombmethods;Determinationofcontent;Petroleumproducts;Sulphur;Sulphurcontent;Testing
【摘要】:Thistestmethodcoversthedeterminationofsulfurinpetroleumproducts,includinglubricatingoilscontainingadditives,additiveconcentrates,andlubricatinggreasesthatcannotbeburnedcompletelyinawicklamp.Thetestmethodisapplicabletoanypetroleumproductsufficientlylowinvolatilitythatitcanbeweighedaccuratelyinanopensampleboatandcontainingatleast0.1%sulfur.Note1-Thistestmethodisnotapplicabletosamplescontainingelementsthatgiveresidues,otherthanbariumsulfate,whichareinsolubleindilutehydrochloricacidandwouldinterfereintheprecipitationstep.Theseinterferingelementsincludeiron,aluminum,calcium,silicon,andleadwhicharesometimespresentingreases,lubeoiladditives,oradditiveoils.Otheracidinsolublematerialsthatinterferearesilica,molybdenumdisulfide,asbestos,mica,andsoforth.Thetestmethodisnotapplicabletousedoilscontainingwearmetals,andleadorsilicatesfromcontamination.SamplesthatareexcludedcanbeanalyzedbyTestMethodD1552.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.See3.2forspecificprecautionarydirectionsincorporatedinthetestmethod.
【中国标准分类号】:E30
【国际标准分类号】:75_080
【页数】:
【正文语种】:英语
基本信息
标准名称: | 内燃机 进、排气门 第3部分: 磁粉探伤 |
英文名称: | Internal combustion engines-Intake and exhaust valves-Part 3:Magnetic particle testing |
中标分类: |
机械 >>
活塞式内燃机与其他动力设备 >>
机体与运动件 |
ICS分类: |
能源和热传导工程 >>
内燃机
|
替代情况: | 替代JB/T 6719-1993 |
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2008-06-04 |
实施日期: | 2008-11-01 |
首发日期: | |
作废日期: | |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国内燃机标准化技术委员会 |
起草单位: | 上海内燃机研究所;马勒三环气门驱动(湖北)有限公司;重庆三爱海陵实业有限公司等 |
起草人: | 赵明好、李晖、彭勇、崔晓蕾、张荣根等 |
出版社: | 机械工业出版社 |
出版日期: | 2008-11-01 |
页数: | 6页 |
批文号: | 24665-2008 |
适用范围
本部分规定了内燃机进、排气门的磁粉检测和评定方法。
本部分适用于气缸直径小于或等于200mm的往复活塞式内燃机铁磁性材料气门表面及近表面缺陷的检验。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 活塞式内燃机与其他动力设备 机体与运动件 能源和热传导工程 内燃机