设为首页|加入收藏

• 首 页
• 美军标 MIL
• 国际标准
• 协会标准
• 国内标准
• 论 坛

IEC 60811-1-1 AMD 1-2001 电缆绝缘和护套材料的通用试验方法第1部分:一般使用的方法第1节:厚度和外形尺寸的测量机械性能测定试验修改1

上一篇: IEC 60811-1-1 Edition 2.1-2001 电缆和光缆的绝缘和护套材料通用试验方法.第1-1部分:一般应用方法.厚度和总尺寸的测量.机械性能测定试验
下一篇: IEC 60811-1-3-2001 电缆和光缆绝缘和护套材料通用试验方法第13部分:通用试验方法--密度测定方法--吸水试验--收缩试验

Product Code:SAE J2751
Title:Earth Moving Machinery - Laboratory Tests for Performance Requirements for Operator Protective Guards for Demolition Applications
Issuing Committee:Optc4, Protective Structures
Scope: This international standard establishes a consistent, repeatable test procedure and performance requirements for evaluating operator-protective guarding structures for demolition applications where demolition debris could reasonably be expected to intrude into the operators environment and present a flying object or crushing hazard. Such guards are intended to provide earth-moving machinery operators with reasonable protection again objects (e.g. rocks and debris) which would otherwise penetrate the operators station from the top, front, side or rear. Demolition applications include the breaking of rocks, concrete, and other materials either on the ground or on a vertical wall; building removal and teardown; removal of roads and bridges; and land clearing. This standard is applicable to backhoe loader, excavator, loader and tractor dozer as defined in ISO 6165. But it is not intended to define the specific guarding structures for each demolition application.
Rationale: This international standard establishes a consistent, repeatable test procedure and performance requirements for evaluating operator-protective guarding structures for demolition applications where demolition debris could reasonably be expected to intrude into the operators environment and present a flying object or crushing hazard. Such guards are intended to provide earth-moving machinery operators with reasonable protection again objects (e.g. rocks and debris) which would otherwise penetrate the operators station from the top, front, side or rear. Demolition applications include the breaking of rocks, concrete, and other materials either on the ground or on a vertical wall; building removal and teardown; removal of roads and bridges; and land clearing. This standard is applicable to backhoe loader, excavator, loader and tractor dozer as defined in ISO 6165. But it is not intended to define the specific guarding structures for each demolition application.

标准名称：	飞机装配工艺 起落架的装配与试验
英文名称：	Aircraft assembling technology assembling and test for landing gear
中标分类：	航空、航天 >> 航空、航天材料与工艺 >> 冷加工工艺
发布部门：	国防科学技术工业委员会
发布日期：	2002-11-20
实施日期：	2003-02-01
首发日期：	1900-01-01
作废日期：	1900-01-01
主管部门：	中国航空综合技术研究所
提出单位：	中国航空工业第二集团公司
归口单位：	中国航空综合技术研究所
起草单位：	哈飞工业集团、中国航空综合技术研究所
起草人：	高君、李胜利、齐淑敏、唐志忠、孙宝忠
出版日期：	1900-01-01
页数：	9页

本部分规定了飞机起落架装配与试验的工艺过程、技术要求等。
本部分适用于飞机起落架的装配与试验。

没有内容

没有内容

没有内容

© 2009-2024 标准资料网 版权所有，并保留所有权利。

北京智聚科技有限公司 Tel: 010-67123753 E-mail: kefu@infoeach.com

京ICP备14017250号-1